3. Of release agent is constant, combined with the float switch, it achieves a stable blending result. Soft.
4. Water is most suitable for release agent. Atomizer will easily get clogged when groundwater is used, but.
5. Filter was installed at water inlet of machine to optimize quality of water. A Y-type filter was installed at.
6. Ooutlet to prevent impurities that affect operation of diaphragm pump.Beneficial to product quality.
7. Ratio range:HA-100 from 50 to 150 times;
Release Agent Auto Mixer Specification List | ||
Specifications / Model | HA-50 | HA-100 |
Ratio range | 50~150 times | 100~300 times |
Dosing cylinder | 100cc/dose | 50cc/dose |
Mixing tank capacity | Setting capacity at 15L | |
Solution Tank capacity | 200L | |
Release agent dilution capacity | 5L ~ 15L / by dilution ratio | |
Inlet air pressure | >4kg/cm2 | |
Inlet water pressure | >2kg/cm2 | |
Pump type | Pneumatic diaphragm pump 1″ | |
Solution flow rate | 30L/minute | |
Water inlet size | 3/4″ 20A | |
Solution outlet size | 1” 25A | |
Power | 1Φ AC220V | |
Operating voltage of main components | DC24V | |
Main structural material | Stainless steel | |
Recommended Die casting machines(T) | Applicable for all die casting machines. Dilution ratio 1:50 ~ 300 times |
|
Weight(kg) | 152.5kg | |
Conditions used | The flow rate of above mentioned dilution was calculated based on air pressure 4kg/cm2- Fluid pressure at 3kg/cm2 |