-
Conveyor belt for die casting machine
The conveyor belt of the die casting machine is mainly used for the separation and transportation of medium pressure castings in the production process of the die casting machine to improve the efficiency of die casting production.
Through the separation device, the product can be separated from the waste, which is better conducive to the molding rate of the product and the recovery of the waste. The design of the conveyor belt is very intelligent. It can flexibly adjust the speed and angle according to the die-casting production to meet the requirements of full-automatic production.
-
GTM Aluminium Alloy Concentrating Melting Furnace
GTM Aluminium Alloy Concentrating Melting Furnace, also referred to as Tower Furnace, adopts tower structure preheating material, which has low energy consumption, strong melting capacity, fast melting speed, automatic feeding, automatic effluent, high degree of automation, safety and reliability.
-
Electrical Crucible Melting Furnace
Feature
1. The furnace lining is pressed with imported refractory fiber module, which replaces the original refractory brick structure.
2. Adopts inlet temperature control instrument, PID control, furnace temperature stability control at ≤±5°C;
-
Electrical Holding Furnace
Feature
1. High temperature alloy wire or silicon carbon rod containing rare elements is used for heating, which is reliable, safe, long service life and easy to replace and maintain.
2. Furnace lining selected imported high-quality materials, integral pouring, service life of more than five years, no aluminum, no crucible loss, no iron proliferation;
-
XGDR Electrical Heating Rotary Double Crucible Furnace
Feature
1. Double crucible design, furnace can be manual or electric rotation, alternate use;
2. Furnace lining is pressed by imported refractory fiber module, replacing the original refractory brick structure, which has the characteristics of good heat preservation effect, small heat storage capacity and high heating speed, and the temperature rise of furnace wall is less than 25°C;
-
QGQR Gas Crucible Tilting Furnace
Feature
1. Furnace lining is composed of high aluminum lightweight brick and refractory fiber, which has the characteristics of good heat preservation, small heat storage and fast heating speed, and the temperature rise of furnace wall is less than 35°C;
2. Adopts inlet temperature control instrument, PID control, furnace temperature stability control at ≤±5°C;
-
LQB Gas Heating Aluminium Holding Furnace
This experimental furnace is suitable for the research of magnesium alloys used by research institutes and universities and universities, and can be customized according to the needs of various non-standard furnaces.
Note: The company reserves the right to make improvements to the products described in the samples. Specifications are subject to change without notice. The product images in the samples are for reference only and the products are subject to actual products. -
CTM Series aluminum alloy melting and holding furnace(Machine-side Furnace)
CTM Series aluminum alloy melting and holding furnace is also called machine-side furnace, which uses tower structure preheating material, low energy consumption, fast melting speed, accurate temperature control, high degree of automation, safe and reliable.
-
Electrical Magnesium Dosing Furnace M Series
Feature
1) The concrete made of special composite steel plate does not pollute the magnesium liquid, has anti-corrosion structure inside, and has long service life.
2) Using a radiant tube or other heating method, the heater can be quickly replaced.
-
DMD large size Electrical Magnesium Dosing Furnace
Feature
1. Insulation furnace over-temperature, leaking furnace automatic alarm.
2. Protection alarm is low, and the protection air flow is low.
3. Heated device short circuit, overload automatic power off protection.
4. Thermal short circuit and open circuit fault alarm automatically.
5. Alarm and fault information can be traced back.
-
Electrical Magnesium Furnace U Series
Structural system:
1) Quickly replace the heater with a radiant tube or other heating method.
2) Imported thermocouple, accurate temperature control and high service life.
3) Quantitative pump lift impeller design, maintenance time every day.
-
JLQB Gas Aluminium Alloy Concentrating Melting Furnace
Feature:
1. The furnace is used for storage and heat preservation of aluminum water;
2. Powerful heat exchange equipment (patent technology), flue gas waste heat reuse, energy conservation and environmental protection;
