Manual Spray Gun Sand Blasting for Cold Chamber High pressure die casting machine

The self-priming type sandblasting gun nozzle is high temperature and high pressure of composite wear-resistant material.

Sintered, hardness greater than HRC93, density greater than 2.50g/cm3, aluminum.

Use wear-resistant aluminum alloy solution treatment, hardness up to HB110, the whole gun.

Service life is more than 1000 hours; design of negative pressure cavity is ideal.

Strong and strong.

INQUIRY NOW

Description

Directions

The inlet nozzle and sand inlet joint are respectively connected with the air source hose and sand suction pipe;

2 Loosen the fastening screws, the intake nozzle can be adjusted inside and outside;

Small amount of sand, and strong strength, outward adjustment, vice versa;

For the sake of self-safety, be sure to wear the sand blasting gun protective clothing.

Main technical parameters

Compressed air	≥0.6 MPa	Sand blasting distance	≤0.5m
Gas Consumption	0.8 to 1.2 m3/min	abrasive particle size	≥46#
Abrasive lift height	£2.0m	Sand blasting capacity	3~10kg/min
External diameter of fixed frame	Ø45 mm	Sand inlet joints	13.5 mm
Diameter of nozzle inner hole	8 mm	Air intake joint	Ø9.5 mm

Previous: Manual Spray Gun Common Single Pipe

Next: Plunger Lubrication Oil

Compressed air	≥0.6 MPa	Sand blasting distance	≤0.5m
Gas Consumption	0.8 to 1.2 m3/min	abrasive particle size	≥46#
Abrasive lift height	£2.0m	Sand blasting capacity	3~10kg/min
External diameter of fixed frame	Ø45 mm	Sand inlet joints	13.5 mm
Diameter of nozzle inner hole	8 mm	Air intake joint	Ø9.5 mm