• footer_bg-(8)

Auxiliary Equipment

  • Auto Ladler for cold chamber die casting machine

    Auto Ladler for cold chamber die casting machine

    Feature

    1. With five linkages, twin gear driven to enhance arm speed and stability, it also increase production output.

    2. The case is mono-block; it greatly increases the precision of machine.

    3. The ladle arm forward/return and pouring/scooping are controlled separately by inverters, thereby increasing the ladle speed, easy to operate.

  • Auto Sprayer for cold chamber die casting machine

    Auto Sprayer for cold chamber die casting machine

    Feature

    1. The spraying volume of module spray head can be adjusted separately, 3 roads controll for fixed and movable mold.

    2. Fixed and movable mold can blow separately.

    3. This machine can stop at any position on X axes and Y axes for sraying and blowing.

  • Auto Extractor for cold chamber die casting machine

    Auto Extractor for cold chamber die casting machine

    Feature

    1. It can be used independently or interface with die cast machine, sprayer, ladler and press machine to form complete automated production.

    2. Driven by motor, extract work-piece in high speed, and with standing-by, shorten casting cycle efficiently.

  • Release agent auto mixer for cold chamber die casting machine

    Release agent auto mixer for cold chamber die casting machine

    Feature

    1. Applicability of this model is wide, it can be used for mixing general and special release agent, the structure is simple, and easy to maintain.

    2. This model has complete liquid level controller that uses liquid dosing cylinder, when mixing, the dosage.

  • Shot beads dispenser for cold chamber die casting machine

    Shot beads dispenser for cold chamber die casting machine

    Feature

    1. Easy to operate, convenient in loading raw material.

    2. Automatic warning when material is empty.

    3. Feeding volume can be adjusted as desired.

    4. Applicable for both big and small granules.

    5. Can choose to feed every die close cycle or after multiple cycles, to save on plunger lubricant cost.

    6. The machine gives precision feeding, is robust and low failure rate.

  • Plunger Lubricant Drip Machine for cold chamber die casting machine

    Plunger Lubricant Drip Machine for cold chamber die casting machine

    Feature

    1. Effective lubrication,the cost of lubrication is half that of other lubrication methods.

    2. Less lubricant,low gas evolution,effectively reduce the inner porosity of casting (especially hydrogen stomata).

  • Integrated servo auto extractor & sprayer for hot chamber die casting machine For 25T-300T Hot Chamber Die Casting Machine

    Integrated servo auto extractor & sprayer for hot chamber die casting machine For 25T-300T Hot Chamber Die Casting Machine

    Feature

    1. Imported electrical components and pneumatic components, stable quality, durable using.

    2. Sliding table adopt imported high rigidity linear double sliding rail, stable, high efficiency.

  • Shot beads dispenser for cold chamber die casting machine

    Shot beads dispenser for cold chamber die casting machine

    The Shot beads dispenser is mainly a lubrication device used to lubricate the plunger head and sleeve, which can effectively quantitatively lubricate the mechanical parts of the activity. Extend its service life and improve production efficiency.

     

    This equipment requires special lubricating particles, which are consumables. We can also provide high-quality lubricating particles to meet your production needs.

  • Conveyor belt for die casting machine

    Conveyor belt for die casting machine

    The conveyor belt of the die casting machine is mainly used for the separation and transportation of medium pressure castings in the production process of the die casting machine to improve the efficiency of die casting production.

     

    Through the separation device, the product can be separated from the waste, which is better conducive to the molding rate of the product and the recovery of the waste. The design of the conveyor belt is very intelligent. It can flexibly adjust the speed and angle according to the die-casting production to meet the requirements of full-automatic production.